Goals of the test:
- Determine where lasers need to be placed for best effect
- Demonstrate that the output of the world’s best lasers, combined with special programming for this style of building (vertical steps) will create a wonderful effect in ambient light conditions, and with interior lighting turned on
TEST #1:
Four lasers covering 36 vertical strips of the wall B1 – to the right side
We will mount four high power lasers of the highest quality upon a scissor lift or two, and project a series of test animations to watch, covering 36 vertical strips with laser light. Given the lift and power, we should be able to accomplish Test #1 setup and execution in one day, finishing several hours after dark.
Test # 1 will look something like this:
TEST #2:
Four lasers covering 18 vertical strips of the wall B1 – centered same as Test #1, with double the laser power concentration. This test will happen immediately after Test #1. It will look something like this:
TEST #3:
Four lasers will be mounted on top of the roof of A1, in order to project across the street to Wall B2. Once the lasers are mapped, we can repeat the animations from Tests 1 & 2
The positions for the test lasers upon the roof:
This test will take another day to set up, I am not sure of the difficulty to et the lasers up on the roof.
Once they are set up, it will take up to three hours to map the part of the building that we need.
